Your cart is currently empty!
Shop
Showing 13–24 of 150 results
-
Bosch 0 280 155 757 A0000788623 Injector for Mercedes 3.2 3.6
Injector cleaned in an Ultrasonic Cleaner. Subsequently tested in a special tester. Fully functional. Parameters Static flow at 3 bar, n-heptane [g/min]: 155.2 Resistance [Ohm]: 14.5 Fuel type: Gasoline injection
$300.00 -
EFI Electrical Harness for Mercedes 1.8 2.0 2.3 2.6
Installation is done by plugging in the coolant temperature sensor and connecting the IAT sensor. Power connections and grounding points, as well as the RPM signal, need to be secured. The harness is protected by a braid that is resistant to weather conditions and the environment under the hood.
$162.50 -
EFI Electrical Harness for Mercedes 2.6 2.8 3.0 M103 M103
Installation involves plugging in the coolant temperature sensor and connecting the IAT sensor. Power connections and the attachment of ground eyes and RPM signal are required. The harness is protected by a braid that is resistant to weather conditions and the environment under the hood.
$162.50 -
EFI Electrical Harness for Mercedes V8
Installation based on plugging in the coolant temperature sensor connector, connecting the IAT sensor. Power connections, as well as fastening ground loops and the RPM signal. The harness is protected by a braid that is resistant to weather conditions and the environment under the hood.
$162.50 -
Electronic Fuel Injection (EFI) Mercedes M102 1.8 2.0 2.3 USED
Kit for converting mechanical fuel injection to electronic fuel injection. This solution eliminates the troublesome injection system that is difficult to repair. The components used are widely available on the market. No functional lambda probe is needed, just a working ignition and exhaust system. Additionally, a sequential system can be installed, which should be accounted…
$550.00 -
Electronic Fuel Injection EFI for Mercedes M110 2.8
Kit for converting mechanical to electronic fuel injection. This solution allows you to eliminate troublesome injectors that are difficult to repair. The parts used are generally available on the market. A functional lambda probe is not required, only a functioning ignition and exhaust system. Additionally, a sequential system can be installed, which must be specified…
$875.00 -
Electronic Fuel Injector EFI for Mercedes M102 1.8 2.0 2.3 with Idle Control Valve
Injectors conversion kit from mechanical to electronic. This application allows us to eliminate troublesome injectors that are difficult to repair. The parts used are generally available on the market. We do not need a functional lambda sensor, just a working ignition and exhaust system. Additionally, a sequential injection system can be installed, which must be…
$837.50 -
Electronic Fuel Injector EFI for Mercedes M102 1.8 2.0 2.3 without idle control valve
A kit for converting injection from mechanical to electronic. This application eliminates the troublesome injection that is difficult to repair. The parts used are generally available on the market. No functioning lambda sensor is needed, only a working ignition and exhaust system. Additionally, a sequential system can be installed, which needs to be specified in…
$775.00 -
Electronic Fuel Injector EFI for Mercedes M104 3.0 M103 2.6 3.0
Injector conversion kit from mechanical to electronic. This application allows us to eliminate troublesome injectors that are difficult to repair. The parts used are widely available in the market. We do not need a functional lambda sensor, just a functional ignition and exhaust system. Additionally, a sequential setup can be installed, which must be specified…
$875.00 -
Electronic Fuel Injector EFI for Mercedes M104 3.0 M103 2.6 3.0
Set for converting mechanical fuel injection to electronic fuel injection. This application allows us to eliminate troublesome injectors that are difficult to repair. The components used are widely available on the market. We do not require a functional lambda sensor. Only a working ignition system and a sealed exhaust are needed. Additionally, a sequential injection…
$737.50 -
Electronic Fuel Injector EFI for Mercedes M104 3.0 M103 2.6 3.0
Set without controller. This kit is designed to convert from mechanical to electronic fuel injection. This upgrade eliminates troublesome injection that is difficult to repair. The parts used are widely available on the market. A functional lambda sensor is not required. Only the ignition system and a sealed exhaust are needed. Additionally, a sequential setup…
$525.00 -
Electronic Fuel Injector EFI Mercedes M104 3.0
Set for converting mechanical injection to electronic injection. This application eliminates the troublesome injection system that is hard to repair. The components used are widely available on the market. A functional lambda sensor is not required. Only the ignition system and a sealed exhaust are needed. Additionally, a sequential system can be installed, which must…
$387.50